Breaking

Post Top Ad

Your Ad Spot

Push Notifications

Monday, June 22, 2020

How to Put a Nail in a Concrete Wall

How to Put a Nail in a Concrete Wall How to Put a Nail in a Concrete Wall How to Put a Nail in a Concrete Wall How to Put a Nail in a Concrete Wall How to Put a Nail in a Concrete Wall How to Put a Nail in a Concrete Wall How to Put a Nail in a Concrete Wall How to Put a Nail in a Concrete Wall How to Put a Nail in a Concrete Wall How to Put a Nail in a Concrete Wall

The toughness and durability of concrete makes it a popular building material for walls. Concrete walls can also add a modern, industrial aesthetic to a room. However, their strength and durability can make it difficult to drive nails into them. Fortunately, there are specialized tools and materials you can use to make the job easier. To minimize the risk of cracking the concrete, you’ll want to use a hammer-set anchor nail. You could also drive masonry nails into the wall for an easy and convenient option.

[Edit]Steps

[Edit]Using an Anchor Nail

  1. Choose hammer-set anchor nails for concrete walls. Hammer-set anchor nails are what’s known as mechanical drive anchors. They consist of a wider section at the bottom that’s designed to expand and a thinner top section that looks like a standard nail. They’re tough enough to be hammered into concrete, but you first need to drill a guide hole into the wall. Look for hammer-set anchor nails at your local hardware or home improvement store.[1]
    Put a Nail in a Concrete Wall Step 1.jpg
    • You can also order hammer-set anchor nails online.
  2. Put on a pair of safety glasses and a face mask. Drilling into concrete creates dust that can irritate your eyes if it gets into them and your sinuses if you breathe it in. Before you begin working, put on a pair of well-fitting safety glasses and cover you nose and mouth with a facemask.[2]
    Put a Nail in a Concrete Wall Step 2.jpg
    • You could also tie a scarf or bandana around your mouth and nose to avoid breathing in the concrete dust.
    • You can find safety glasses and face masks at hardware stores, department stores, and by ordering them online.
  3. Fit a carbide-tipped masonry bit into a hammer drill. A hammer drill, also known as a percussion or impact drill, is a specialized power tool that’s used to drill into hard surfaces, such as concrete. Insert a carbide-tipped masonry bit into the end of your drill and tighten it so it’s held securely in the jaws.[3]
    Put a Nail in a Concrete Wall Step 3.jpg
    • Look for hammer drills and carbide-tipped masonry bits at your local home improvement or hardware store. You can also order them online.
    • Carbide-tipped masonry bits are strong enough to drill into concrete without cracking.
  4. Hold the drill against the wall with both hands. Take a wide stance and plant your feet firmly on the ground so you’re strong and stable. Press the drill bit against the wall where you want to put your nail, hold the drill with both hands, and apply pressure using your body weight so the drill won’t slip or move out of place when you use it.[4]
    Put a Nail in a Concrete Wall Step 4.jpg
  5. Drill a hole into the wall deep enough to fit your hammer-set anchor. With your drill pressed against the wall, start drilling slowly and bring it up to full speed to create a pilot hole in the wall. Make the hole as deep as the wider bottom section of your hammer-set anchor.[5]
    Put a Nail in a Concrete Wall Step 5.jpg
    • If concrete dust builds up in the hole as you’re drilling, remove the drill and blow out the dust before you continue.
  6. Drive the anchor nail into the hole you drilled with a hammer. Hold the wider bottom section of the hammer-set anchor nail against the hole you drilled and start tapping it into place with a standard hammer. As you drive the anchor into the concrete, the bottom section will expand and hold the nail in place. Continue hammering until the wide section is completely in the wall.[6]
    Put a Nail in a Concrete Wall Step 6.jpg

[Edit]Driving Masonry Nails into Concrete

  1. Mark the wall where you want to put a nail with a pencil. Pinpoint the exact spot where you want to put your nail by using a pencil or marker to make a small point on the wall. If you plan to install multiple nails into your wall to hang or install something, check to make sure they’re measured evenly with a ruler or tape measure.[7]
    Put a Nail in a Concrete Wall Step 7.jpg
  2. Hold a masonry nail against the concrete wall with your fingers. A masonry nail, also known as a concrete nail, is made of tough steel and designed with fluted shafts that help them drive into concrete without breaking. Place the tip of the masonry nail against the marking you made and hold it steady with your fingers.[8]
    Put a Nail in a Concrete Wall Step 8.jpg
    • Look for masonry nails at hardware stores, home improvement stores, department stores, or by ordering them online.
  3. Tap the nail with a mash hammer to hold it in place. A mash hammer, also known as a masonry hammer, as a double-sided hammer that’s much heavier than standard hammers, making it the best choice to drive nails into concrete. With your nail held in place against the wall, tap the end of it with your hammer to drive the nail just enough so it’s held in place in the wall and you don’t need to hold it with your fingers.[9]
    Put a Nail in a Concrete Wall Step 9.jpg
    • A standard hammer won’t be heavy or solid enough to drive the nail into the concrete wall.
    • Look for mash hammers at hardware stores and home improvement stores, or by ordering one online.
  4. Drive the masonry nail into the concrete wall with the hammer. Use carefully aimed hammer strikes to drive the nail into the concrete wall so you don’t miss and bend the nail or strike the wall and damage it. Continue striking the hammer until the nail is driven in to where you want it.[10]
    Put a Nail in a Concrete Wall Step 10.jpg
    • If you’re fastening something to the concrete wall, drive the nail all the way in. of the nail sticking out if you plan to hang something from it.}}

[Edit]Warnings

  • Always wear safety glasses and cover your nose and mouth with a face mask whenever you drill into concrete.

[Edit]Things You’ll Need

[Edit]Using an Anchor Nail

  • Safety glasses
  • Face mask
  • Hammer drill
  • Carbide-tipped masonry drill bit
  • Hammer-set anchor nails
  • Hammer.

[Edit]Driving Masonry Nails into Concrete

  • Pencil
  • Masonry nails
  • mash hammer

[Edit]References

Digital Trend, New tech, tech news, wikiHow

No comments:

Post a Comment

Compare & get cheapest Flights

Post Top Ad